System Description

BDA M610 TA03 / 2021-08-17 (GB)
17
EMERGENCY OPENING
If you have already changed the default emergency opening code, enter your valid emergency opening code here.
Aer an emergency opening in the Fixed Code mode, the lock can be used again normally with the previously pro-
grammed xed code. If you want to change the xed code, follow the instrucons in secon „User changes the Fixed
code“ or in secon “Switching to Fixed Code mode”.
Aer an emergency opening in the Free Code mode, the lock can be used normally again (see page 11, „Opening &
closing in Free Code mode“).
If an invalid emergency opening code is entered, the LED display ashes red three mes.
Enter emergency opening code (example: Werkseinstellung)
RESET TO FACTORY SETTINGS
If the reset to factory sengs is carried out, all stored xed code, master code, emergency opening code and
sengs will be deleted.
The lock must be in open posion. There must be no baery warning. If necessary, perform an emergency opening
to open the lock.
If you have already changed the default master code, enter your valid master code here. In order to conrm the
master code, press the keys
x
+ simultaneously.
Keys
1 0 1 0 5
Display
Lock opens.
Enter of master code (example: factory sengs)
Keys
9 0 8 0 7 0 5 5 5 5
x
+
Display
The lock is in conguraon
mode (connuous green
light).
simultaneously
Keys
0
Display
When the LED display turns
o, the reset to factory
sengs is completed.