System Description

BDA M610 TA03 / 2021-08-17 (GB)
7
1 2 3 4
Insert the pin into the hole
on the boom side and
press unl the cover is
released. Then li up the
cove r.
Hold a 9V baery to the
contacts at the keypad
while entering the code or
emergency opening code
for opening the lock. Pay
aenon to the correct
polarity of baery!
Insert the two guide lugs of the
cover into the recesses. Press
the cover unl it clicks into
place.
EMERGENCY POWER SUPPLY
The locking system has the opon of an emergency power supply in case of empty baeries.
INSTALLING THE OPTIONAL LABELING CLIP
An individual labeling clip can oponally be aached to the keypad unit.
1 2 3
Aach the labeling clip from the
rear at the desired posion.
Labeling clip can be aached
at four posions:
2 x right side (top / boom)
2 x le side (top / boom)
Mount the keypad together
with the labeling clip.