System Description
BDA M410 TA03 / 2019-09 (GB)
12
SWITCHING TO FIXED CODE MODE
The lock must be in open posion. There must be no baery warning.
The xed code must be 3 to 10 digits.
If you have already changed the default master code, enter your valid master code here. In order to conrm the
master code, press the keys
x
+
simultaneously.
The LED display rst ashes red twice aer pressing the enter buon and then turns to a connuous green light unl
a new xed code has been entered.
Now enter your new personal xed code immediately. When entering, make sure that the LED display acknowledges
each key input.
If you cancel the enter process of a new xed code with the cancel buon or if you enter an incorrect code (invalid
code length), the code 1-2-3 will automacally be valid. In this case the LED display ashes red ten mes.
Check that the code has been accepted correctly with an open cabinet door.
Switching to Fixed Code mode deacvates the funcon „Automac opening in Free Code mode“ or „Automac
closing in Fixed Code mode“ which may have been acvated before.
Enter of master code (example: factory sengs)
OPENING & CLOSING IN FIXED CODE MODE
If an invalid code is entered, the LED display ashes red three mes.
Keys
2
Display
The lock waits for entering
a new xed code (con-
nuous green light).
Enter of new xed code (example: 1-4-5-6)
Keys
1
4
5
6
Display
When the LED display
turns o, the new xed
code is valid.
Keys
9
0
8
0
7
0
5
5
5
5
x
+
Display
The lock is in conguraon
mode (connuous green
light).
simultaneously
Close (example: 1-4-5-6)
Open (example: 1-4-5-6)
Keys
1
4
5
6
Display
Lock closes.
Keys
1
4
5
6
Display
Lock opens.