System Description
BDA M410 TA03 / 2019-09 (GB)
13
USER CHANGES THE FIXED CODE
The lock must be in open posion. There must be no baery warning.
The xed code must be 3 to 10 digits..
If you have already changed the default xed code for the user, enter your valid code here.
The previous code will be overwrien by entering the new code.
Aer the buons
x
+
are pressed simultaneously the LED will turn to a connuous green light unl a new xed
code is entered.
Now enter your new personal xed code immediately. When entering, make sure that the LED display acknowledges
each key input.
If the new code is not entered correctly, the previous code remains valid. In this case, the LED display ashes red ten
mes.
Check with the open cabinet, that the new xed code has been accepted correctly (see page 12, „Opening & closing
in Fixed Code mode“).
Enter of valid xed code (example: 1-4-5-6)
Keys
1
4
5
6
x
+
Display
The lock waits for entering
a new xed code (con-
nuous green light).
simultaneously
Enter of new xed code (example: 1-2-3-4-5)
Keys
1
2
3
4
5
Display
When the LED display
turns o, the new xed
code is valid.