User manual

Optical configuration 17
REPLACING AN EFFECT FLAG
1 Disconnect the fixture from AC power and allow it to cool.
2 Remove the cover.
3 Turn the effect wheel to access the desired position. Press the effect flag
forwards slightly to release it and then grasp it by the edges and remove.
4 To insert an effect flag, slide it under the retention spring until it snaps into
place.
5 Replace the cover before applying power.
GOBO ORIENTATION
Figure 2 shows the correct orientation for different gobo types. When in doubt, install gobos with the more
reflective side towards the lamp.
Coated Glass Gobos
Uncoated side towards stageCoated side towards lamp
When an object is held up to the
coated side there is no space between
the object and its reflection. The back
edge of the gobo cannot be seen
when looking through the coated side.
When an object is held up to the
uncoated side there is a space between
the object and its reflection. The back
edge of the gobo can be seen when
looking through the uncoated side.
Textured side towards wheel
Textured Glass Gobos
Smooth side away from wheel
Metal Gobos
Reflective side towards lamp Black side towards stage
Image/text Gobos
Reversed image towards lamp True image towards stage
Figure 2: Gobo orientation