User manual

18 CX-10
Color filters
STANDARD CONFIGURATION
The CX-10 provides 12 dichroic color filters as shown below.
REPLACING A COLOR FILTER
1 Disconnect the fixture from AC power and allow it to cool.
2 Remove the fixture cover.
3 Turn the color wheel to access the desired color filter. Press the filter
forwards slightly to release it and then grasp it by the edges and remove.
4 To insert a filter, slide it under the retention spring until it snaps into place.
5 Replace the fixture cover.
3
2
4
5
6
7
8
9
10
11
12
13
1
Position Color
1 Open
2 UV transmitter
3 Yellow 603
4 Blue 104
5 Pink 312
6 Green 206
7 Blue 108
8 Red 301
9 Magenta 507
10 Blue 101
11 Orange 306
12 Dark green
13 Purple 502
Figure 5: CX-10 color wheel
A
B