User manual

24 CX-10
Flicker wheel: The Flicker Wheel (P/N 62400222) provides a different kind
of effect and can be used at high speed for motion effects, such as passing
trains. It can also be effectively used for just breaking up the beam of a
fixture and for an organic strobe effect.
Coarse radial breakup: The Coarse Radial Breakup disc (P/N 62400224)
is particularly effective for animating light from a non-focused source whilst
providing a minimal loss in intensity due to the high 'white to black' ratio of
the radial pattern. It is also effective for similar uses to the Radial Breakup
disc.
Coarse tangential breakup: The Coarse Tangential Breakup disc (P/N
62400226) can be used on its own in an unfocused form to give the image
of flames. It can also be combined with gobos to give a drifting image to the
projection.
AFFIXING AN ANIMATION WHEEL TO THE COLOR WHEEL
To affix an animation wheel to the color wheel:
1 Using the control menu (see “Control menu” on page 34), select the wheel (WHEL) personality (under the
PERS menu) and set it to EFCT. If you fail to do this an error will occur when the fixture resets.
2 Disconnect the fixture from AC power and allow it to cool.
3 Remove the fixture cover.
4 Using a Phillips screwdriver, remove the effect wheel module.
DHA 19
M
A
R
T
I
N
0
8
0
3
0
2
DHA 20
M
A
R
T
I
N
0
8
0
3
0
2
DHA 21
M
A
R
T
I
N
0
8
0
3
0
2