User manual
Control menu 49
(Press
and hold
Enter for a
few
seconds
to use this
menu)
Enable pan/tilt position correction system.
Disable pan/tilt feedback. Setting not saved.
Enable on the fly reset of color, gobo, and effect wheels.
Disable on the fly reset of color, gobo, and effect wheels.
See “Adjustment submenu” on page 50.
Pan offset.
Tilt offset.
Dimmer offset.
Cyan offset.
Magenta offset.
Yellow offset.
CTC offset.
Gobo wheel offset.
Effect wheel offset.
Iris offset.
Focus offset.
Zoom offset.
Return all offsets to the default settings.
PCB test for service use only.
Regulate the effect cooling fans for quieter performance. Enabling
this option increases the operating temperature and thus increases
wear on the components.
Operate cooling fans at full speed. This is the default from software
version 1.4.
Manually set fixture to software update mode.
(when
Service
LED is lit)
Displayed when lamp hours exceed average life (750 hours).
Displayed if head temperature exceeds 120° C (248° F).
Menu Item Options Notes (Default settings in bold print)
Table 2: Control menu