Owner's manual

ManualsBrandsMartin Universal Design ManualsFurnitureU-1264 SIDE UTILITY TRAY

U-1264 SIDE UTILITY TRAY ASSEMBLY

Martin Universal Design, Inc. • 4444 Lawton Avenue, Detroit, MI 48208 USA

Tel: (313)895-0700 / Fax:(313)895-0709 • E-mail: Custservmud@aol.com

ONE YEAR GUARANTEE

This Martin Universal Design, Inc. product has a one year guarantee

to be free from manufacturers defects during that period of use by the

original purchaser. Items or parts subjected to extreme temperature or

abuse or use of this product other than manufacturers intended purpose

is not covered under this guarantee.

ITEM # PARTS LIST QTY

U-1264 Side Utility Tray 1

Bracket 2

Screws 4

Nuts for Screws 4

Phillip WoodScrews 8

[8] - Phillip Screws

Fig. 1

1. Take the utility tray and attach each bracket to the

bottom side of the tray using [2] each screws and

nuts. Insert the screw from the bottom of the bracket

up through the utility tray and secure with the nut from

the inside of the side utility tray. Repeat for all [4] screws

and nuts. As shown in FIG 1.

STOP

PLEASE DO NOT RETURN THIS SIDE TRAY to

the Store where you purchased it. If you are un-

able to assemble or parts are missing,

PLEASE Call Customer Service at

Martin Universal Design, Inc.

313-895-0700 or Email: custservmud@aol.com

Any Questions with Assembly? We Can Help

Tools Needed for assembly:

Hammer & Phillips Screwdriver

or power screwdriver needed for assembly.

[1] - Side Utilty Tray

[2] - Side Utilty Tray

Brackets

4] - Screws & Nuts

Fig. 2

Rear view of Drawing

Top and Side Tray

2. Now you will attach the assembled Side Tray to the

rear side of the Drawing Board. Place the Side Tray

brackets onto the Rear side of the Drawing Board and

mark with a pencil in each of the [4] holes in each

bracket. Take Tray away and now tap the drawing board

on each marked spot with a pointed object and hammer

to break the surface of the Drawing Board, to allow

easier screwing of the screws. Once all holes are tapped.

Have someone hold the tray in position and screw in [4]

wood screws into each bracket to secure tray to drawing

board. As shown in FIG 2.

Once secure, you are ﬁnished and ready to use.

Summary of content (1 pages)

PAGE 1
U-1264 SIDE UTILITY TRAY ASSEMBLY ITEM # U-1264 PARTS LIST Side Utility Tray Bracket Screws Nuts for Screws Phillip WoodScrews QTY 1 2 4 4 8 Tools Needed for assembly: Hammer & Phillips Screwdriver or power screwdriver needed for assembly. [2] - Side Utilty Tray Brackets [1] - Side Utilty Tray 4] - Screws & Nuts [8] - Phillip Screws Fig. 1 Fig. 2 Rear view of Drawing Top and Side Tray 1. Take the utility tray and attach each bracket to the bottom side of the tray using [2] each screws and nuts.