Instruction Manual

ManualsBrandsMartin Universal Design ManualsProducts for childrenU-9102 KIDS' DUAL ART CENTER

4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709

Email: CustservMUD@gmail.com • visit us at www.MartinUniversalDesign.com

09/2011- RPI

Kids’ Dual Art Center Assembly Instructions

Model # U9102

Parts List

A) 1 ea Black Tray

B) 1 ea. Wooden Dowel Rod

D) 1 ea. Paper Roll - not pictured

E) 4 ea. Bottom Legs

F) 4 ea. 3/16” x 2 “ Bolts

G) 4 ea. 3/16” x 2 1/2” Bolt

H) 8 ea. 3/16” Flat Washer

I) 8 ea. 3/16” Wing Nut

J) 2 ea. Brackets

K) 4 ea. 5/8” Phillip Head Screws

L) 1 ea. Upper Easel Assembly

PLEASE NOTE:

All holes drilled to close tolerances for

maximum rigidity. It may be necessary to

tap bolts in place with a hammer.

PERIODIC RE-TIGHTENING WILL

ASSURE A STURDY PRODUCT.

(A) Black Tray

1 each

(E) Bottom

Legs

4 each

(F) 3/16” x 2”

Bolts

4 each

(G) 3/16” x 2-1/2 ”

Bolts

4 each

(K) 5/8” Phillip

Head Screws

4 each

(H) 3/16”

Flat Washer

8 each

(I) 3/16”

Wing Nut

8 each

(J)

Bracket

2 each

(B) Wooden

Dowel Rod

1 each

(L) Upper Easel

Assembly

1 each

WARNING:

CHOKING HAZARD - small parts

Not for children under 6 years

I M P O R T A N T !

If you have any difculty assembling your Kids’ Dual

Art Centers or need customer service assistance,

Please call: Martin Universal Design, Inc.

Customer Service Hot Line at (313)895-0700

If you need additional parts, it is not necessary to

contact your dealer, our Customer Service Rep. will

forward them to you immediately.

Made in China

Summary of content (4 pages)

PAGE 1
Kids’ Dual Art Center Assembly Instructions Model # U9102 Parts List (A) Black Tray 1 each A) 1 ea Black Tray B) 1 ea. Wooden Dowel Rod D) 1 ea. Paper Roll - not pictured E) 4 ea. Bottom Legs F) 4 ea. 3/16” x 2 “ Bolts G) 4 ea. 3/16” x 2 1/2” Bolt H) 8 ea. 3/16” Flat Washer I) 3/16” Wing Nut 8 ea. J) 2 ea. Brackets K) 4 ea. 5/8” Phillip Head Screws L) 1 ea. Upper Easel Assembly (B) Wooden Dowel Rod 1 each PLEASE NOTE: All holes drilled to close tolerances for maximum rigidity.
PAGE 2
Kids’ Dual Art Center Assembly Instructions Model # U9102 Enclosed are all the components necessary to assemble your new Deluxe Kids’ Dual Art Center #U-9102. Prior to assembly make sure all your parts are enclosed by checking them against the parts list. Tools needed to assemble are a Phillips Screwdriver and a Hammer. TO ASSEMBLE: green chalkboard side 1. Attach 2 bottom legs (E) to green chalkboard side of upper easel assembly (L), using 4 ea.
PAGE 3
Kids’ Dual Art Center Assembly Instructions Model # U9102 3. Attach plastic tray (A) to white board side, using 2 ea. 3/16” x 2 1/2” bolts (G) into holes below white board, first insert bolt through black plastic tray, then through upper and lower leg and then attach washer (H) onto bolt and tighten wing nut (I). Repeat with other side. See FIG 2. White Drawing Board Side I G A H FIG 2. 4. Attach brackets (J) to both sides of easel using 4 ea.
PAGE 4
Kids’ Dual Art Center Assembly Instructions Model # U9102 Complete easel with part identification FIG 5. Complete easel illustration. FIG 6. D B J K F I H F G A E E E FIG 5. FIG 6. ! WARNING: CHOKING HAZARD - small parts Not for children under 6 years 4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709 Email: CustservMUD@gmail.com • visit us at www.MartinUniversalDesign.