Installation Guide

2-3:
❸
●
❹
❺
❻
Features & Benefits
·
·
·
·
·
Place the new wheel on the axle - push in until you hear a click.
Made from 100% post-consumer recycled materials, and are also completely
recyclable.
Pull wheel from axle
While maintaining leverage with pick/pin, use the other hand on the inside of the
wheel to slide the wheel away from the can. If the pin is disengaged from the axle
you should have no difficulty in removing the wheel. If the wheel is not disengaging
you may have to readjust your pick/pin.
For 6" - 8" Wheels
For 10" - 12" Wheels
330 lbs. (150 kg) load capacity.
Meets ANSI Z245.30 Requirements
Pull on the wheel to ensure it is securely locked into place.
Take out the trash!
Roll-Tech’s Snap-Lock product line is intended primarily for residential roll-out waste containers and can
also be used on other types of wheeled equipment.
Quiet-rolling solid rubber tire on a durable impact-resistant poly hub (center).
Hub's built-in spring-loaded pin engages with groove in axle to keep wheels firmly
attached.
Depending on the measurement you took, apply 1 to 3 spacers evenly to both
Each wheel comes with three ½” spacers.
wheels (This provides wheel clearance so
the wheel does not come in contact with
the side of can).