Safety Information

ManualsBrandsMartin ManualsFog MachinesRUSH Fog Fluid for Fog Effects Generators, 25L

SAFETYDATASHEET

MARTINEFFECTFLUIDS



RevisionNo.:LDate:14/05/2018 

ReplacesSDSNo.:111KDate:28/04/2016



SDSNo.111LDate:May2018

Sheet1of10



1. IdentificationoftheSubstance/Mixture&oftheCompany/Undertaking

1.1. ProductIdentifier:

Name:  JEMPro‐FogFluid,ExtraQuickDissipating

JEMPro‐FogFluid,QuickDissipating

JEMPro‐FogFluid

JEMPro‐FogFluid,HighDensity

JEMLow‐FogFluid,QuickDissipating

JEMLow‐FogFluid

JEMLow‐FogFluid,HighDensity

JEMK1HazeFluid

JEMC‐PlusHazeFluid

RUSHClubSmokeDualFluid

RUSH&THRILLFogFluid

RUSH&THRILLHazeFluid

MartinPro‐CleanandStorageFluid

ProSteam(ExtraFast)HP



DiscontinuedEffectFluidTypescoveredbythisSDS:

ProSmokeSuperFluid(ZR),(FreshlyFragranced)

ProSmoke

StudioFluid(DX)

ProSmokeHighDensityFluid(SP)

ProSteamSimulationFluid

i‐FogFluid

HeavyFogFluid(A1)

HeavyFogFluid(B2)

HeavyFogFluid(C3)

RUSHFogFluid

RUSHHazeFluid

ProCleanSupremeFluid

RegularDJFluid(DJ)

ProHazeFluid,(FreshlyFragranced)

RUSHELXSmokeFluid

RUSHELXHazeFluid



Forthemostuptodateversionofthisdocument,pleasescanthis

QRCodeorvisit:

http://www.martin.com/EN‐US/Safety‐Documents



Summary of content (10 pages)

PAGE 1
SAFETY DATA SHEET MARTIN EFFECT FLUIDS For the most up to date version of this document, please scan this QR Code or visit: http://www.martin.com/EN‐US/Safety‐Documents 1. Identification of the Substance/Mixture & of the Company/Undertaking 1.1.
PAGE 2
SAFETY DATA SHEET MARTIN EFFECT FLUIDS 2. 1.2. Relevant Identified Uses Of The Substance Or Mixture And Uses Advised Against: Fluid mixture for use in the creation of atmospheric fog or haze effects using a dedicated Martin brand atmospheric effect machine. 1.3. Details of the Supplier of the Safety Data Sheet: Martin Manufacturing (UK) Ltd Belvoir Way, Fairfield Industrial Estate, Louth, Lincolnshire, LN11 0LQ UK Tel: +44 (0) 1507 604399 Fax: +44 (0) 1507 601956 Email: jem‐service@harman.com 1.4.
PAGE 3
SAFETY DATA SHEET MARTIN EFFECT FLUIDS Discontinued Fluid Types covered by this SDS: Pro Smoke Super Fluid (ZR), (Freshly Fragranced) Pro Smoke Studio Fluid (DX) Pro Smoke High Density Fluid (SP) Pro Steam Simulation Fluid i‐Fog Fluid Heavy Fog Fluid (A1) Heavy Fog Fluid (B2) Heavy Fog Fluid (C3) RUSH Fog Fluid RUSH Haze Fluid Pro Clean Supreme Fluid Regular DJ Fluid (DJ) Pro Haze Fluid RUSH ELX Smoke Fluid RUSH ELX Haze Fluid No other elements are needed in accordance with Article 25 and Article 32(6) of R
PAGE 4
SAFETY DATA SHEET MARTIN EFFECT FLUIDS 3.2. 4. First Aid Measures 4.1. 5. Contains monopropylene glycol, for which a community workplace exposure limit has been set. Mixtures: The largest single component of this product is de‐mineralised water.
PAGE 5
SAFETY DATA SHEET MARTIN EFFECT FLUIDS 6. 7. 5.2. Special Hazards Arising From the Substance or Mixture: Hazardous Combustion Product Oxides of carbon including aldehydes. 5.3. Advice for Firefighters: Special equipment for firefighting: Self‐contained breathing apparatus. Accidental Release Measures 6.1. Personal Precautions, Protective Equipment and Emergency Procedures: Wear appropriate PPE when handling ‐ see section 8.2. 6.2.
PAGE 6
SAFETY DATA SHEET MARTIN EFFECT FLUIDS 8. Exposure Controls/Personal Protection 8.1. Control Parameters: 8.1.3. Exposure Limit Values Does not exceed 10 mg/m³ for particulate suspension and 474 mg/m³ for total vapour plus particulates. OES for monopropylene glycol set at 150 ppm (total vapour and particulates) for 8‐hour TWA, and 10 mg/m3 (particulates) for 15‐minute STEL. Norway ‐ Substance with CAS number 57‐55‐6 has Norwegian exposure limits of: 25 ppm and 79 mg/m³ 8.2.
PAGE 7
SAFETY DATA SHEET MARTIN EFFECT FLUIDS 9.2. 10. 11. Other Information: No data available to us. Stability and Reactivity 10.1. Reactivity: No data available to us. 10.2. Chemical Stability: Stable in normal conditions. 10.3. Possibility of Hazardous Reactions: Possibility of explosive decomposition if combined with strong acids or bases at elevated temperatures. 10.4. Conditions to Avoid: Elevated temperatures. 10.5. Incompatible Materials: Strong acids and bases; strong oxidisers. 10.6.
PAGE 8
SAFETY DATA SHEET MARTIN EFFECT FLUIDS 13. 12.2. Persistence and Degradability: The preparation is largely biodegradable: BOD5 = 1.08 gO2/g; ThOD = 1.68 gO2/g; COD = 1.63 gO2/g BOD20/ThOD = 86% 12.3. Bioaccumulative Potential: Low. 12.4. Mobility in Soil: Liquid with low volatility, soluble in water, predicted to have high mobility in soil. 12.5. Results Of PBT And vPvB Assessment: No data available to us. 12.6. Other Adverse Effects: None known Disposal Considerations 13.1. 14.
PAGE 9
SAFETY DATA SHEET MARTIN EFFECT FLUIDS 15. 14.6. Special Precautions for User: Not Regulated. 14.7. Transport in Bulk According To Annex II of MARPOL73/78 and the IBC Code: Not Regulated. IATA Not Regulated – Goods are not dangerous, hazardous or restricted for transport by the International Air Transport Association Regulatory Information 15.1.
PAGE 10
SAFETY DATA SHEET MARTIN EFFECT FLUIDS Sources of information: 1. Suppliers’ Safety Data Sheets for substances used as raw materials in the preparation. 2. Regulation (EC) No 1907/2006 – REACH 3. Regulation (EC) 453/2010 – REACH Amendment 4. Regulation (EC) No 1272/2008 ‐ CLP Regulation 5. GB 13690‐2009 National Standard of the People’s Republic of China 6. NFPA 325M Guide to fire hazard properties of flammable liquids, gases, and volatile solids 7.