User manual

Programming shows 17
10 You can enable a macro that produces circular, vertical, or horizontal movement
effects during the scene. To do so:
• Press the MACRO button once, twice, or three times, to choose the appropriate
macro type.
• Set the speed of the movement using the FADE TIME/PITCH fader.
• Set the size of the circle/amplitude of the movement using the WAIT
TIME/MASTER FADER.
•Press ENTER to toggle out of Macro mode (and return to Fade/Wait time
parameters). You can use this toggle if you need to return to the Macro settings at
a later time.
Note: When using macros in a scene you also need to program the
other effects, such as color and gobo usage, as the macros are
not transparent (the look of the previous scene is not carried
over). The macro is not used during the fade, but starts during
the wait part of the scene.
11 Set the fade time for the scene using the FADE TIME/PITCH fader.
12 Set the wait time for the scene using the WAIT TIME/MASTER fader.
13 When the scene is set press ADD. This button will add the currently selected scene to
the end of the show. You can also scroll back and forth between scenes using the <
and > buttons and use the INSERT and DEL buttons where appropriate. Use the
STORE button to apply changes to the currently selected scene.
14 Repeat these steps as appropriate to add up to 10 scenes to the show.
15 Press PREV. (preview) to test the show.
16 Press EDIT to exit.