User's Manual

Service and maintenance 15

Access to the multi-module

The multi-module contains the rotating gobo, color and animation wheels as well as the CMY flags. Access

to these is easiest if you remove the module from the head.

To remove the multi-module:

1. Remove the top head cover, position the head with the front glass angled downwards and the top side

facing upwards, and apply the tilt lock (see “Access to the head” on page 13).

2. See Figure 10. Unhook the

multi-module wiresets from their

cutout A in the zoom/focus

module chassis.

3. See Figure 11. Unplug the

two pairs of power and data

multi-module connectors B

and C from their sockets on

the distribution PCB D.

When you reconnect the

wiresets you must plug in the

connectors as pairs (power

and data connectors B

beside each other and power

and data connectors C

beside each other), but it

does not matter which pair of

sockets you plug which pair

of connectors into. The fixture

will recognize which plugs

are installed in which

sockets.

Figure 10: Multi-module wireset routing

Figure 11: Disconnecting the multi-module