User manual

28 MAC 250 Wash
Control menu
Factory default settings are shown in bold type.
Menu Item Options Notes (default settings in bold print)


- (16-bit
mode)
1 - (16-bit
Extended mode)
DMX address (default address =  )


16-bit

16-bit Extended



Map DMX pan control to tilt channel and vice versa.

Normal pan and tilt control


Reverse DMX pan control, right → left

Normal pan control, left → right


Reverse DMX tilt control, down → up

Normal tilt control, up → down


Normal pan/tilt speed

Maximum pan/tilt speed


Medium effects speed

Fast effects speed

Pan/tilt speed slave. Effects speed controlled by pan/tilt
speed setting.


Optimize effects for speed

Optimize effects for silence (studio mode).



Display remains on

Display extinguishes 2 minutes after last key press

Display extinguishes 10 minutes after last key press


Automatic display dimming
 -
Set display intensity manually


Enable DMX lamp off command

Disable DMX lamp off command (but allow DMX lamp off
if all 3 CMY channels are set to a value from 230 - 232 /
91%)


Enable DMX reset

Disable DMX reset (but allow DMX reset if all 3 CMY
channels are set to a value from 230 - 232 / 91%)

Allow DMX reset if reset command sent for 5 seconds


Lamp strikes automatically within 90 seconds of power on

No automatic lamp strike

Lamp strikes if DMX is present, douses after 15 mins. if no
DMX signal received


Effect wheels turn shortest distance

Effect wheels do not cross open position


Linear dimming curve

Tungsten dimming characteristics


CMY blackout after shutter closed for 3 seconds

No CMY blackout
Table 4: Control menu