Specifications

4
CE mark
All products that are produced by JEM / Martin carry the CE Certification.
These products meet the requirements of the following EC Standards and as such, comply with the EMC
(Electromagnetic Compatibility) and LVD (Low Voltage Directives), directives of the European Community:
EN 50 081-1 1992 Generic Emission Standard for domestic and light Industrial environments.
EN 50 082-1 1992 Generic Immunity Standard for domestic and light Industrial environments.
EN 60 335-1 1995 Safety of household and similar electrical appliances
These standards reference the following European standards:
Emissions:
EN 55 022 /B RF voltage and field strength
EN 60 555 Harmonic current content
EN 55 014 RF voltage (discontinuous)
Immunity:
IEC 801-2 Electrostatic discharge to case
IEC 801-4 Common mode fast transients
These standards also meet the requirements of CISPR 22.
JEM did not carry the CE mark on products that were produced prior to 1995.
These products can be identified by either the DIN/XLR socket on the rear or top of the unit or the Mains PCB:
If the unit has a 5 pin DIN or a 4 pin XLR without the CE text on the rear, the unit is classed as NON-CE.
If the PCB has a 12 pin Molex connector fitted to it, this is classed as a NON-CE unit.