User manual

Installation and setting up 11
If using the Magnum 850 connect the remote control to the REMOTE
IN connector on the rear panel. The remote control is permanently
connected to the Magnum 650.
If you are operating several machines using the machine-to-machine link
function, connect up the machines in a daisy-chain using RJ45 (computer
network) type cables. The maximum total length of cable, including the remote
cable, is 50 metres.
Machine-to-machine link is not available on the Magnum 650.
Do not connect a computer network to the RJ45 remote / link sockets on the
Magnum 850. Although the connectors are compatible, the electrical signals are
not, and equipment may be damaged.
Final checks
Before applying power to the Magnum smoke machine, verify the following:
• the machine is safely located or installed and meets the location
requirements stated on page 10
to additional
machines