User Manual

RUSH Wizard User Manual 13
in the mounting bracket for attachment, but ensure that the load will be
distributed evenly.
4. See illustration below. Working from a stable platform, fasten the clamp
securely around the truss chord or similar bar.
5. Install a safety cable as directed in ’Securing with a safety cable’ below.
6. Loosen the swivel locks, tilt the fixture to the desired angle, and retighten.
Securing with a safety cable
Secure the fixture with a safety cable (or other secondary attachment) that is
approved for the weight of the fixture so that the safety cable will hold the
fixture if the primary attachment fails.
See illustration above. Attach the safety cable to the attachment point
(arrowed) on the fixture and to a secure anchoring point (securely anchored
eyebolt or truss chord, for example).