User Manual

24 RUSH Wizard User Manual
2. Use the DOWN and UP buttons to select YES (pan inversion) or NO (pan
normal).
3. Press ENTER to confirm (or press MENU to exit without making a
change).
Fixture test
Automatic tests of all functions can be run from the control menus.
Auto test
To perform a complete test of all of the fixture functions:
1. Select AUTO TEST and press ENTER to confirm. The fixture will run the
auto test routine.
2. Press MENU to stop the test and exit.
Lamp settings
Lamp On/Off
To manually power the lamp on or off:
1. Select LAMP ON/OFF and press ENTER to confirm.
2. Use the DOWN and UP buttons to select ON or OFF.
3. Press ENTER to confirm and power the lamp on or off (or press MENU to
exit).
Lamp Power On
To set the lamp to power on automatically when the fixture is powered on:
1. Select LAMP POWER ON and press ENTER to confirm.
2. Use the DOWN and UP buttons to select ON or OFF.
3. Press ENTER to confirm (or press MENU to exit without making a
change).
DMX lamp control
The lamp can be controlled remotely by DMX. The following options are
available:
• LAMP OFF VIA DMX allows the lamp to be powered off by sending a DMX
command.