User Manual

RUSH Wizard User Manual 25
• LAMP ON VIA DMX sets the lamp to power on automatically as soon as a
DMX signal is present.
• LAMP OFF IF DMX OFF sets the lamp to power off automatically as soon
as a DMX signal is not present
Ignition delay
An ignition delay of 0 to 255 seconds can be set, so that there is a delay
between power on and lamp on:
1. Select LAMP ON DELAY and press ENTER to confirm.
2. Use the DOWN and UP buttons to set a delay duration in seconds.
3. Press ENTER to confirm (or press MENU to exit without making a
change).
Fixture information
Fixture operating hours counter
To see how many hours the fixture has been in use since manufacture:
1. Select FIXTURE HOURS and press ENTER to display the number of
hours of use.
2. Press MENU to exit.
Lamp operating hours counter
The fixture has a resettable lamp hours counter that displays the number of
hours the lamp has been used. Reset the counter to zero when you install a
new lamp, and check the counter frequently. Do not exceed the lamp lifetime,
or the lamp may explode causing damage that is not covered by the product
warranty.
To see how many hours the lamp has been in use:
1. Select LAMP ON HOURS and press ENTER to display the number of
hours the lamp has been in use.
2. Press MENU to exit the counter
To reset the lamp hours counter:
1. Select LAMP ON HOURS
and press ENTER. When the hours of use are
displayed, press ENTER again and then use the UP and DOWN buttons
to select RESET TIME.