User Manual

26 RUSH Wizard User Manual
2. Press ENTER to reset the counter to zero (or press MENU to exit without
making a change).
3. Press MENU to exit.
Firmware version
To see which fixture software is currently installed in the fixture:
1. Select FIRMWARE VERSION
and press ENTER to display the installed
firmware version.
2. Press MENU to exit.
Defaults
To return the fixture to its factory default settings:
1. Select DEFAULTS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select YES (return to default settings)
or NO.
3. Press ENTER to confirm (or press MENU to exit without making a
change).
Reset fixture
The fixture resets each time it is powered on, but you can force it to reset at
any time. To force a reset:
1. Select RESET
2. Press ENTER to confirm (or press MENU to exit without resetting).