User Manual

40 RUSH Wizard User Manual
Control menus
To access the control menus, press the MENU button. Use the UP and
DOWN buttons to navigate the menus. Select any required menu option using
the ENTER button. Exit using the MENU button. For more information, see
‘Using the control menus’ on page 13.
Default fixture settings are shown in bold.
Menu Setting/value Explanation
DMX Address 001–512 Fixture DMX address setting
Show Mode
Show 0 Random show
Show 1 Pre-programmed show 1
Show 2 Pre-programmed show 2
Show 3 Pre-programmed show 3
Show 4 Pre-programmed show 4
Show 5 Pre-programmed show 5
Show 6 Pre-programmed show 6
Slave Mode
Slave 1
Fixture copies the master in
master/slave operation
Slave 2
Fixture copies the master with slight
variations in master/slave operation
Split color
Yes Split colors allowed
No Full colors only
Sound Mode
Off
Sound activation (music trig)
disabled
On Sound activation (music trig) enabled
Sound Sense 0–100
Sound activation microphone
sensitivity adjustment
DMX State
Master/Slave
If no DMX signal received, fixture
enters master/slave mode
Blackout
If no DMX signal received, fixture
blacks out
Last State
If no DMX signal received, fixture
returns to last state it was in when it
was not receiving a DMX signal
Back Light
Off
Display backlight goes into sleep
mode if control panel not used
On Display backlight constantly on
Pan Reverse Yes/No Invert pan direction
Auto Test Automatic test of all effects
Lamp On/Off On/Off Manually power lamp on or off