User Manual

42 RUSH Wizard User Manual
Troubleshooting
This section describes a few common problems that may occur during
operation and provides some suggestions for easy troubleshooting:
Symptom Potential cause Remedies
No light from fixture,
or fans not working.
If no DMX signal is
present, fixture may be
set to ‘Blackout’ DMX
state.
Power supply issue,
such as blown fuse,
faulty connector or
damaged cable.
Change setting in DMX
state menu.
Check whether fixture’s
power indicator LED is lit.
Check all power
connections and cables.
Replace fixture fuse.
Fixture does not
react to music beat.
Fixture not in show
mode.
Sound activation
disabled.
Sound activation
microphone sensitivity
too low for music
source.
Fixture receiving DMX.
Tap microphone to check
correct functionality. The
fixture should react when in
sound activation mode.
Set fixture to show mode in
DMX state menu.
Enable.
Adjust microphone
sensitivity.
Stop DMX signal.