User Manual

12 Control settings
Control settings
Overview
The unit is controlled using the remote control. You can control it in these ways:
• Automatic Continuous run mode.
• Automatic haze bursts using a repeating timer
• You trigger a timed burst of haze using the “one-shot” timer
You can also set the haze output level using the knob.
Continuous Run Mode
Press the FOG button once (for less than one second) to enter continuous run
mode or timer mode. If the timer is set, the timer mode will run automatically,
otherwise continuous mode will be enabled and the machine will produce haze
until the button is pressed again. The green timer LED will light when in
continuous run mode.
Setting the Automatic Timer
The Automatic Timer allows you to set the machine to keep producing timed
bursts of haze without anyone having to press any buttons. You need to set two
times: the run/on time during which the machine will produce haze, and the
wait/off time during which the machine will idle.
Output level / timer
programming knob
Machine heating light
Machine ready to fog
light
Fog / Timer engage
button
Timer set button
Timer Off light
Timer On light