User Manual

Control settings 15
What the status lights mean
The four lights on the remote have the following functions. The red “HEAT” light
and the green “READY” light are also duplicated on the rear of the machine
itself.
HEAT+READY meaning
no lights Machine is not powered, or remote is not connected.
heat
Machine is heating but is not yet up to operating
temperature.
heat + ready
Machine is heating and has reached minimum operating
temperature. Haze output level may be reduced while
heating.
ready
Machine has finished heating and is at full operating
temperature.
If the ready LED is flashing, refer to the following code
table.
Single pulse Calibration Error
Double pulse Fluid-Out Error
ready flashing
Triple pulse Overheat Error
OFF+ON meaning
no lights Timer is disabled
both on Timer is programmed but not enabled
“OFF” lit Timer is running, currently in Off/Wait period
“ON” lit
Timer is running, currently in On/Run period or continuous
mode
“ON” flashing The timer “ON” time is currently being programmed
“ON” lit, “OFF”
flashing
The timer “OFF” time is currently being programmed