User manual

Lamp 19
To orient the Arcstream lamp for maximum life
If using the GE Arcstream lamp, maximum lamp life will be achieved by installing
the lamp so that the arc is parallel with the ground.
This is the case in most installations. If the fixture is installed sideways, however, as
shown to the right, below, the arc will be vertical. Turn the lamp socket 90° to
achieve the ideal burning position.
1 Disconnect the fixture from power and allow it to cool.
2 Remove 2 screws from the lamp-socket assembly with a Pozidriv #2
screwdriver. Remove the lamp assembly.
3 Remove 2 screws from the lamp socket with a Pozidriv #1 screwdriver.
4 Turn the socket 90°, as shown below, in the direction that results in the least
amount of twist in the wires. Tuck the lamp wires into the notches in the socket
and replace the screws.
5 Insert the lamp assembly carefully so that the lamp wires are clear of the fan
and replace the access-plate screws.
6 Align the lamp as described above.