User manual

12 Martin DMX 5.3 and RDM 5.5 Splitters user manual

Warning! Do not fasten screws with a thread length of more than 4

mm (0.15 in.) into the ends of either Splitter.

19-inch rack mounting

Both the DMX 5.3 Splitter and the RDM 5.5 Splitter can be mounted in

pairs side-by-side in standard 19-inch racks. Both models have the same

dimensions and mounting system. To mount in a rack:

1. Fasten two Splitters together side-by-side using the four Torx 10

M3 x 6 thread-forming attachment screws supplied with one of the

Splitters as shown at B in Figure 7.

2. Fasten the L-brackets supplied with one of the Splitters to the outer

ends of the pair of Splitters using the eight supplied thread-forming

Torx 10 M3 x 4 screws as shown at C in Figure 7.

Warning! Do not fasten screws with a thread length of more than

4 mm (0.15 in.) into the ends of either Splitter.

3. Use the L-brackets and suitable screws to fasten the Splitters into the

rack.

Figure 7: Mounting options