User manual

Introduction 7
Introduction
Thank you for selecting a Martin Professional™ DMX/RDM
Splitter/Amplifier. This range consists of two products:
• The Martin DMX 5.3 Splitter™
• The Martin RDM 5.5 Splitter™
Devices can be mounted in pairs in a standard 19-inch rack or fixed to a
flat surface using the supplied mounting brackets. They can also be
mounted in a rig using a truss mounting bracket.
For the latest documentation and other information about this and all
Martin Professional products, please visit the Martin website at
www.martin.com
Comments or suggestions regarding this document may be e-mailed to
[e-mail] or posted to: Technical Documentation, Martin
Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.
Features
• Five amplified, regenerated, buffered and optically isolated outputs
•“thru” output that continues the data link unmodified
• Auto-sensing power supply: 100 - 240 VAC nominal, 50/60Hz
• Provision for mounting in the rig to simplify cabling, mounting in pairs in
a standard 19-inch rack (1U) or fastening to a flat surface.
Unpacking
The Splitter is supplied in a cardboard box. The following items are
included:
• Two ‘wing’ brackets and all screws required to either mount splitters
side-by-side in pairs ready for rack mounting or prepare a splitter for
fastening to a surface.
• Power cable with US plug (Martin DMX 5.3 Splitter) or Neutrik
PowerCon power input connector without cable (Martin RDM 5.5
Splitter)
• This user manual