Specifications

INTRODUCTION
The Roboscan PRO 1220 is a high performance, intelligent lighting projector which features:
1200 Watt MSR lamp.
2x9 dichroic colours plus white and black-out, including remotely selectable black-out
whilst changing.
Colour mixing.
2x10 motorized gobos, including remotely selectable black-out whilst changing.
Gobo mixing.
Variable shutter speed control for strobe effects.
175 degree pan in 0.028 degree steps (6208 steps).
83 degree tilt in 0.056 degree steps (1472 steps).
Variable pan and tilt speed with acceleration control, including remotely selectable black-
out whilst moving.
Motorized focus.
Motorized iris.
Motorized dimmer with micro-stepping resolution.
Multiplying prisms.
High Speed Strobe effect ranging from2-16Hertz.
Frost Filter for softer lighting effects.
Modular design of all components for ease of servicing.
Optional Transport Handles and extra mounting bracket.
Full Optical path with all lenses Double side, Multi-layer coated giving 35% higher light
output than previous versions.
Top cover with snap-lock and safety wire provides instant access to the unit.
Efficient fan cooling.
Can be controlled by the 2032 controller (16 pcs.) and 3032 controller (48 pcs.)
Can be controlled via DMX 512 with a Martin Interface.
The modular design of the Roboscan PRO 1220 enables the user to have future
upgrades of features and so it will be possible to ’customize’ your own personal unit.
SELECTING MAINS VOLTAGE AND FREQUENCY
The mains transformer can be wired to match 100, 120, 215, 230 or 250 Volts and the
ballast to 50 or 60 Hz. Select according to your local power supply. REMEMBER TO
DISCONNECT FROM THE MAINS FIRST!
Unscrew the 4 finger screws which secure the cover over the terminal connections
located at the mirror end of the unit. Locate the connectors and connect the brown wire
marked withaVtothedesired terminal on the top Four, hereby selecting the correct
voltage, connect the other brown wire, marked with an F to the desired terminal on the
bottom Two, corresponding to the desired frequency.
Re-assemble the unit before connecting to the mains.