User manual

RUSH DC1 Aqua User Manual
12
3. Fold the legs of the mounting bracket together and bolt a rigging clamp
securely to the mounting bracket. The bolt used must be M12, grade 8.8
steel minimum. It must pass through both mounting bracket legs and be
fastened with a self-locking nut.
4. Working from a stable platform, hang the fixture with its clamp on the truss
and fasten the clamp securely.
5. Secure the fixture with a safety cable as directed below.
Securing with a safety cable
Secure the fixture with a safety cable (or other secondary attachment) that is
approved for the weight of the fixture so that the safety cable will hold the
fixture if a primary attachment fails.
Loop the safety cable through the eyebolt in the back of the fixture (see 3 in
illustration on page 15) and around a secure anchoring point. Do not loop the
safety cable around the fixture’s mounting bracket only, as this will leave the
fixture unsecured if it separates from the bracket.