User Manual

RUSH MH 5 Profile User Manual 29
To replace a rotating gobo:
1. Disconnect the fixture from power and allow it to cool for at least 10
minutes.
2. See illustration below. Remove the fixture head covers using a Phillips
screwdriver.
3. The rotating gobos sit in goboholders that slot into the rotating gobo wheel.
Note the position of the gobo – you will need to reinstall it in the same
orientation. Lift out the goboholder that contains the gobo that is to be
replaced.
4. See illustration below. The gobo is held in place in the goboholder by a
wire clip. Taking care to avoid scratching or applying pressure to the gobo,
remove the clip and lift the gobo out of the goboholder.