User Manual

RUSH MH 5 Profile User Manual 37
Control menus
To access the control menus, press the MENU button. Use the UP and DOWN
buttons to navigate the menus. Select any required menu option using the
ENTER button. For more information, see ‘Using the control menus’ on page
18.
Default fixture settings are shown in bold.
Menu Sub-menu Explanation
DMX Address 001–512 Fixture DMX address setting
Show Mode Show 1…Show 4 Show 1 to 4
Slave Mode
Slave 1
Fixture copies the master in
master/slave operation
Slave 2
Fixture copies the master with
slight variations in master/slave
operation
DMX State
Master/Slave
If DMX signal stops, fixture enters
master/slave mode
Blackout
If DMX signal stops, fixture
blacks out
Hold
If DMX signal stops, fixture
continues to obey the last
command it received via DMX
Sound State
On Sound activation (music trig)
Off
No sound activation
Sound Sense 0…100
Microphone sensitivity for sound
activation
Pan Inverse
Yes Invert pan control
No
Normal pan control
Tilt Inverse
Yes Invert tilt control
No
Normal tilt control
Back light
On Control panel display backlight on
Off Display backlight off
Focus Adjust 0–255
Gobo wheel 1 focus in standalone
mode
Focus 2 Adjust 0–255
Gobo wheel 2 focus in standalone
mode
Dimmer Calibrat. 50–100 Dimmer calibration
Dimmer Speed
No
Dimmer optimized for speed
Yes Dimmer optimized for smoothness
Auto test Automatic test of all functions