User Manual

10 RUSH Wizard User Manual
Introduction
The RUSH Wizard™ is a multi-beam effect light that creates intense long-
throw narrow beams with multi-color and gobo pattern projections and
features electronic dimming and a strobe effect. The Wizard features a show
mode with preprogrammed macros that allow fast deployment of a full range
of effects. It offers both DMX control and standalone operation with music trig
and master/slave options.
The fixture is supplied with a discharge lamp (installed), a 1.5 m (5 ft.) power
cable (local power plug not included) and a folding bracket to allow fastening
to a surface or rigging clamp.
Before using the product for the first time
1. Read ‘Safety information’ on page 4 before installing, powering, operating
or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, attach a local
power plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture.
5. Check the RUSH support pages on the Martin Professional website at
www.martin.com for the most recent user documentation and technical
information for the fixture. RUSH by Martin™ user manual revisions are
identified by the revision letter at the bottom of the inside cover.
Note that whenever AC mains power is applied to the fixture, it will reset all
effects and functions to their home positions. This process usually takes
around 20 seconds.