Owner's Manual
Table Of Contents
- User's Manual
- Contents
- Content Check List
- Safety Warnings and WEEE Recycling
- Square Grilles, Pre-Installation Brackets, & Fire Rated Backboxes
- Protect Your Investment
- Break-In
- General Speaker Placement
- Placement Options (IC3, IC3-AW IC6, IC8, IC8-AW, IW5-LCR, IW6 Speakers)
- Placement Options (IC6-ST Stereo Speaker)
- Placement Options (Aimable IC6-HT Speaker)
- Connection
- In-Ceiling Mounting (pictorial)
- In-Wall Mounting (pictorial)
- Installation
- Painting the Speaker Grille
- FAQ & Troubleshooting
- Warranty and Service
- Specifications
- Template
18
Specifications*
System Frequency Response ............
Aiming............................
Sensitivity..........................
Impedance .........................
Crossover Frequency..................
High-Frequency Driver ................
Low-Frequency Driver.................
Binding Post Inputs ...................
Suitable Amplifier Range ..............
Maximum Power Handling .............
Weight............................
Overall Size (dia. x depth | h x w x d) ....
Required opening
......................
Projection from wall surface ............
Depth required behind wall surface.......
*Specifications are subject to change
without notice.
IC6-HT
55–20,000 Hz ±3 dB
Rotate speaker
89dB
Compatible with 8 ohms
2,500 Hz
1" (2.5cm) titanium dome
6.5" (16.5cm) mineral-filled polypropylene cones
Push style accommodates wire up to 12AWG
15–80 Watts
50 Watts
5.3 lbs. each (2.4 kg)
11.38" x 5.28" (28.9 x 13.4cm)
10-3/8" (26.3cm) diameter
0.25" (0.7cm)
4.95" (12.6cm)
Ø11.38” (28.9cm)
5.28” (13.4cm)
4.95” (12.6cm)
Ø10.2” (25.9cm)