User Manual
14
Bulk Action: Use this when you want to change input
names without clicking apply after each change. Enter
names for all applicable inputs, select Check All from un-
der the Bulk Items drop-down, then select Apply from un-
der the Bulk Items drop-down.
Input Name: Assign a custom name for each input (up to
16 characters). You must click Apply to save this setting.
This name corresponds with the input list in the MDA’s user
interface. Please note, this does not necessarily change the
input name in associated control systems.
Trim: Adjusts the relative level of each input. Use this when
one input plays at a dierent level than the others, causing
changes in volume levels during playback while switching
between sources.
2.5 INPUTS SETTINGS
The user interface design is subject to change.