Brochure

SPECIFICATIONS
Frequency Response
45–25,000 Hz ± 3 dB
Dispersion
80° x 30°
High Frequency Driver
1.25” x 2.4” (3.2cm x 6.1cm) Folded
Motion XT Transducer with 4.5” x 2.75”
(11.4cm x 7cm) diaphragm.
Low Frequency Transducer
Two 5.25” (13.4cm) aluminum cone with cast
aluminum basket. Concave dust cap.
Sensitivity
94 dB @ 2.83 volts/ meter
Impedance
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
Recommended Amplifier Power
20–250 watts
Crossover Frequency
700 & 2000 Hz
Weight
13 lbs. (5.9 kg)
Dimensions
15.2” x 7.8” x 3.9”
(38.6cm x 19.9cm x 9.9cm)
Cut-Out Dimensions
14.4” x 7.1” (36.7cm x 18cm)
Depth Required Behind Wall Surface
3.7” (9.4cm)
Projection From Wall Surface
0.2” (0.6cm)
Specifications are subject to change without notice.
Axis
Stealth Architectural Series
Axis offers ultra-high-performance from an in-wall and is sized to fit horizontally
between 16” studs for the ultimate center channel or left/right application. Two
5.25-inch black aluminum cone woofers and a low-distortion Folded Motion™
XT tweeter provide richly detailed highs, and an open & revealing midrange.
Axis’ robust mounting-lock system is coupled with a solid aluminum chassis. When not
in use, the constant-control mounting locks are held securely within a self-contained
housing. When moved into place during installation, they couple the chassis and add
rigidity to the wall. Driver complements are held in place by a flush-mounted 3/4-inch
solid high-gloss piano black baffle that hides mounting hardware for customers who
want to showcase their speaker without a grille. The Folded Motion Tweeter rotates
easily without the need for tools to allow precise sound dispersion either horizontally
or vertically and can be performed post-installation.
Precision-Built, Advanced-Topology Vojtko
™
Crossover
Vojtko crossover topology ensures vanishingly low distortion and seamless driver integration. Each crossover is
hand-built on a super-thick, double-layered black PC board using the finest polypropylene and low-DF electrolytic
capacitors, massive air coils, custom wound inductors and 16-gauge copper wire, with thermal and current
protection. Every note and nuance of the audio signal is perfectly preserved.