user’s manual The Great American Speaker Company
WARNING! • Refer servicing to a qualified Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 technician. • To prevent fire or shock hazard, do not expose this module to moisture. • Turn amplifier off should any abnormal conditions occur. • Do not drive speaker beyond its rated power. Break In . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing On A Flat Surface . . . . . . . . . . . . .
x2 x1 3
CONNECTION WARNING! Turn your amplifier off before making or breaking any Fig. 1 signal connections! These speakers are designed with easy-to-use push-style binding posts that accept bare wire or pins (fig. 2). Additionally, by removing the rubber inserts, they will accept banana plugs (fig. 3) Assign the same color to the (+) and (–) terminals on both the speaker and the amplifier. Make certain that all connections are tight. Fig. 2 Fig.
Fig. 5 cally shielded and therefore should not be placed directly beside or atop a CRT television. INSTALLING ON A WALL Note: These instructions assume the mounting surface is standard wood frame and sheet rock construction. If you wish to mount to another type of surface, consult a bonded contractor. Required hardware (included): • (1) Installation template • (1) Wall bracket • (1) Shoulder bolt Required hardware (not supplied): • (2) 1.
Fig. 7A 3 Mark the pilot hole locations. 4 Drill the pilot holes using a 1/8-inch drill bit. If a pilot hole DOES NOT hit a stud, widen that pilot hole using a 1/4-inch drill bit and install a wall anchor at that location (fig. 7A & 7B). 5 Using the 1.5-inch Phillips screws, mount the wall brackets as shown (fig. 7A & 7B). 6 Hang the speaker, guiding the wall mount bolt into the wall bracket’s keyhole. Fig.
FREQUENTLY ASKED QUESTIONS How do I clean my speakers? Use a dust free cloth (such as a micro fiber cloth) or a soft brush to remove dust from your speakers. Do not spray any kind of cleaning agent on or in close proximity to the drivers.
GENERAL INFORMATION WARRANTY INFORMATION Your speakers are provided with an automatic Limited 90 Day Warranty coverage. You have the option, at no additional charge, to receive a Limited 5 Year Warranty coverage.
SPECIFICATIONS* MARTINLOGAN MOTION FX Frequency Response . . . . . . . . . . . . . . . . . . . . . 74–25,000 Hz ± 3 dB Dispersion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160° x 80° Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 dB @ 2.83 volts/ meter Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers. Crossover Frequency. . . . . . . . . . . . . . . . . . . . .
DIMENSIONAL DRAWINGS MARTINLOGAN MOTION FX ® The Great American Speaker Company Lawrence, Kansas, USA P/N: 9500065 rev. 2 10 tel 785.749.0133 fax 785.749.5320 ©2013 MartinLogan Ltd. All rights reserved. www.martinlogan.com Rev.
