User`s manual

Exos Crossover for the Monolith III speaker system Page 4
40Hz CONTOUR
80Hz CONTOUR
0-4 +4 +8 0-8 -4 +4
dB
dB
Boost/Cut of EXOS at 40 Hertz
and 80 Hertz.
These controls allow you to tailor the music
according to your room resonances. These controls do
not change the crossover frequency or the overall
output of the woofer, they are only designed to
enhance specific frequency points which your room is
contributing or subtracting information. Most rooms
will have what is known as a suck-out around 40 or 80
Hz, or may have a room
resonance at those
frequencies. The fre-
quency contour control
allows you to select a
specific area in which
your room is offending
the performance of your
system and allows you to
control that area.
The 40 Hz control
provides a 12dB range of
adjustment from -4dB to
+8dB in increments of 4.
The 80Hz control also
provides a 12dB range,
but from -8dB to +4dB.
40Hz & 80Hz Contour
Front Panel Controls