user’s manual The Great American Speaker Company
WARNING! • Refer servicing to a qualified technician. • To prevent fire or shock hazard, do not expose this module to moisture. • Turn amplifier off should any abnormal conditions occur. • Do not drive speaker beyond its rated power. The lightning bolt flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of potentially “dangerous voltage” within the product’s enclosure that may be sufficient to constitute a risk of electric shock.
x4 Motion 12 Motion 10 3
Connection WARNING! Turn your amplifier off before making or breaking any signal connections! Fig. 1 These speakers are designed with easy-to-use push-style binding posts that accept bare wire or pins (fig. 2). Additionally, by removing the rubber inserts, they will accept banana plugs (fig. 3) Assign the same color to the (+) and (–) terminals on both the speaker and the amplifier. Make certain that all connections are tight. Fig. 2 Assembly Fig. 4 Fig.
TOE-IN To achieve superior stereo imaging we recommend that you aim them towards the primary listening position. 2) Remove existing feet or spikes. Thread new spikes into holes and screw them in all of the way. If the speaker does not sit level loosen one spike until level is achieved. SOLID FOOTING With the use of the included MiniETC™ (Energy Transfer Coupler) spikes, your speakers will be firmly planted on the floor, bass will tighten, and imaging will become more coherent.
Frequently Asked Questions How do I clean my speakers? Use a dust free cloth (such as a micro fiber cloth) or a soft brush to remove dust from your speakers. Do not spray any kind of cleaning agent on or in close proximity to the drivers. Is there likely to be any interaction between my speakers and the television in my A/V system? Yes. These speakers are not shielded and should be kept at least 2 feet away from a CRT television.
General Information WARRANTY INFORMATION Your speakers are provided with an automatic Limited 90 Day Warranty coverage. You have the option, at no additional charge, to receive a Limited 5 Year Warranty coverage. To obtain the Limited 5 Year Warranty coverage you need to complete and return the Certificate of Registration to MartinLogan within 30 days of purchase. For your convenience MartinLogan also offers online warranty registration at www.martinlogan.com.
Specifications* MARTINLOGAN MOTION 10 MARTINLOGAN MOTION 12 Frequency Response . . . . . . . 65–25,000 Hz ± 3 dB 40–25,000 Hz ± 3 dB Dispersion . . . . . . . . . . . . . . . 80° x 80° 80° x 80° Sensitivity . . . . . . . . . . . . . . . 90 dB @ 2.83 volts/ meter 92 dB @ 2.83 volts/ meter Impedance . . . . . . . . . . . . . . 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers. 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers.
Dimensional Drawings MARTINLOGAN MOTION 10 9
Dimensional Drawings MARTINLOGAN MOTION 12 10
® The Great American Speaker Company Lawrence, Kansas, USA P/N: 9500020 tel 785.749.0133 fax 785.749.5320 ©2010 MartinLogan Ltd. All rights reserved. www.martinlogan.com Rev.
guide de l’utilisateur Le Grand Fabricant D’Enceintes Américain
AVERTISSEMENT! • Pour les réparations, faites appel à un technicien compétent. • Pour éviter les risques d’incendie ou de décharge électrique, n’exposez pas ce module aux vapeurs d’eau ni à l’humidité. • Veuillez éteindre l’amplificateur en cas de conditions anormales. • Ne poussez pas l’enceinte au-delà de sa puissance nominale.
x4 Motion 12 Motion 10 15
Raccordement AVERTISSEMENT! Éteignez l’amplificateur avant de faire des raccordements ou d’interrompre tout raccordement de signal! Fig. 1 Ces enceintes sont dotées de bornes de raccordement facile à utiliser de style bouton-poussoir qui acceptent les fils nus ou les broches (fig. 2). De plus, en enlevant les garnitures en caoutchouc, elles acceptent les fiches bananes (fig. 3) Attribuez la même couleur aux bornes (+) et (-) sur l’enceinte et l’amplificateur.
d’aigus et haut-parleurs de graves) en les positionnant de deux à trois mètres du mur avant et à deux mètres ou plus des murs latéraux (Fig. 5). ORIENTATION Pour obtenir une meilleure image stéréo, nous vous recommandons de les orienter vers la position d’écoute principale. BASE SOLIDE En utilisant les crampons MiniETC™ (Energy Transfer Coupler) compris, vos enceintes seront fermement ancrées au sol, les graves seront plus serrées et l’image sera encore plus cohérente.
Foire Aux Questions Comment nettoyer les enceintes? Utilisez un linge exempt de poussière (comme un linge en microfibres) ou une brosse à poils doux pour enlever la poussière sur les enceintes. Ne vaporisez pas de produits nettoyants sur les haut-parleurs ou à proximité de ceux-ci. Peut-il y avoir une interaction entre mes enceintes et la télévision dans mon système A/V? Oui.
Renseignements Généraux RENSEIGNEMENTS SUR LA GARANTIE Vos enceintes sont vendues avec une garantie limitée automatique de 90 jours. Vous avez la possibilité d’obtenir, sans frais supplémentaires, une garantie limitée de cinq ans. Pour obtenir la garantie limitée de cinq ans, vous devez remplir et retourner le certificat d’enregistrement à MartinLogan dans les 30 jours qui suivent la date d’achat. Pour plus de commodité, MartinLogan permet également l’enregistrement en ligne à la garantie à l’adresse www.
Spécifications* MARTINLOGAN MOTION 10 MARTINLOGAN MOTION 12 Réponse de Fréquence . . . . . . 65–25 000 Hz ± 3 dB 40–25 000 Hz ± 3 dB Dispersion . . . . . . . . . . . . . . . 80° x 80° 80° x 80° Sensibilité . . . . . . . . . . . . . . . 90 dB à 2,83 volts/mètre 92 dB à 2,83 volts/mètre Impédance . . . . . . . . . . . . . . 4 Ohms. Compatible avec des amplificateurs classés 4, 6 ou 8 Ohms. 4 Ohms.
Plans Dimensionnels MARTINLOGAN MOTION 10 21
Plans Dimensionnels MARTINLOGAN MOTION 12 22
® Le Grand Fabricant D’Enceintes Américain Lawrence, Kansas, USA P/N: 9500020 tél. 785.749.0133 téléc. 785.749.5320 ©2010 MartinLogan Ltd. Tous droits réservés. www.martinlogan.com Rev.