user’s manual
WARNING! • Refer servicing to a qualified Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 technician. • To prevent fire or shock hazard, do not expose this module to moisture. • Turn amplifier off should any abnormal conditions occur. • Do not drive speaker beyond its rated power. Break In . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing On A Flat Surface . . . . . . . . . . . . .
x4 x1 (Motion 4i only) 3
CONNECTION WARNING! Turn your amplifier off before making or breaking any Fig. 1 signal connections! These speakers are designed with easy-to-use push-style binding posts that accept bare wire or pins (fig. 2). Additionally, they will accept banana plugs (fig. 3) Assign the same color to the (+) and (–) terminals on both the speaker and the amplifier. Make certain that all connections are tight. Fig. 2 Fig.
should not be placed directly beside or atop a CRT television. Fig. 5 20° Toe-In: When installed on a surface and used as front channels we recommend aiming your speakers towards the primary listening position. INSTALLING ON A WALL If the speaker is being mounted approximately AT EAR LEVEL, the speaker should be oriented with the tweeter at top. This will disperse sound directly towards the desired listening area (fig. 5).
3 Locate mounting location using a level and the installation template. Fig. 8 (Motion 4i) 4 Mark the pilot hole locations. 5 Drill the pilot holes using a 1/8-inch drill bit. If a pilot hole DOES NOT hit a stud, widen that pilot hole using a 1/4-inch drill bit and install a wall anchor at that location (fig. 8). 6 Using the 1.5-inch Phillips screws, mount the wall brackets as shown. Please note, only the MartinLogan Motion 4 requires the additional wall bracket spacer (fig. 8).
FREQUENTLY ASKED QUESTIONS How do I clean my speakers? Use a dust free cloth (such as a micro fiber cloth) or a soft brush to remove dust from your speakers. Do not spray any kind of cleaning agent on or in close proximity to the drivers.
GENERAL INFORMATION WARRANTY INFORMATION Your speakers are provided with an automatic Limited 90 Day Warranty coverage. You have the option, at no additional charge, to receive a Limited 5 Year Warranty coverage. To obtain the SERVICE Should you use your MartinLogan product in a country other than the one in which it was originally purchased, we ask that you note the following: Limited 5 Year Warranty coverage you need to complete the warranty registration within 30 days of purchase.
SPECIFICATIONS* MARTINLOGAN MOTION 2i MARTINLOGAN MOTION 4i Frequency Response . . . . . . . . 115–23,000 Hz ± 3 dB 70–23,000 Hz ± 3 dB Dispersion . . . . . . . . . . . . . . . 80° x 80° 80° x 80° Sensitivity. . . . . . . . . . . . . . . . 86 dB @ 2.83 volts/ meter 90 dB @ 2.83 volts/ meter Impedance . . . . . . . . . . . . . . . 6 Ohms. Compatible with 4, 6, 4 Ohms. Compatible with 4, 6, or 8 Ohm rated amplifiers. or 8 Ohm rated amplifiers. 3,800 Hz 2,900 Hz 0.94” x 1” (2.4cm x 2.
DIMENSIONAL DRAWINGS MARTINLOGAN MOTION 2i 10” (25.5cm) 4.7” (11.8cm) 4.6” (11.
DIMENSIONAL DRAWINGS MARTINLOGAN MOTION 4i 12.6” (32cm) 5.6” (14.3cm) 5.7” (14.
MARTIN LOGAN ® Lawrence, Kansas, USA tel 785.749.0133 fax 785.749.5320 ©2017 MartinLogan Ltd. All rights reserved. www.martinlogan.
iU ·~···~·==========================~~· I , / eu . -------------------------------------------------- ~ -----It') :: - 0 Motion® MA RTil N LOGAN '' '' '' '' '' ''' '' ' 1111 I rev.
e u .
MARTIN LOGAN EXTEND YOUR WARRANTY COVERAGE Register your new Martin logan purchase within 30-days ONLINE to secure extended warranty coverage! Visit: martinlogan.com/register SEE BACK OF PRODUCT FOR SERIAL NUMBER IMPORTANT: Please keep your original proof of purchase - a copy of your original receipt is required for all warranty claims. Visit martinlogan.com/warranty for more information. MAN0113 (REV.
MARTIN LOGAN If you have any questions regarding the setup or operation of this Martin logan product, please visit martinlogan.com/support MAN0113 (REV.
