User's Manual

11
Speaker & Burial Cable Connections
SPEAKER DIRECTION & SETTINGS
1. Aim the speaker by loosening the screw in the speaker
arm and retightening once the desired aim is achieved.
2. Set the dial on every satellite speaker
in your sytem. To access the dial, remove the
rear cap from your satellite speaker by turning a
quarter turn in a counter clockwise direction. Now
pull the cap away from the satellite enclosure.
Set the dial to correspond with the number of
satellite speakers and subwoofers in the installation
(see ‘Audio Settings Chart’ on page 15).
Combine and
twist (clockwise)
the red wires
(as shown in the
diagram) from
the amp, speaker
and to the next
speaker. Secure
these three wires
using the provided
silicone-filled wire
connectors; Repeat procedure for Black wires. NOTE: You
may have to cut some of the speaker cable emanating from
the speaker to a more manageable size.
To Amp
To Adjoining
Speaker
WIRING & SPEAKER INSTALLATION (CONT’D)
8oh
m
8o
h
m
7.5W
3.75W
15
W
7.
5W
3
0W
30W
1
5
W
1
0
0
V
O
L
T
S
7
0
V
O
L
T
S