User's Manual

8
7. To attach the
speaker to the
ground stake,
hand thread the
twist cap to the
ground stake.
8. The speaker is
now mounted
to the ground
stake. The next
step is wiring,
go the ‘Wiring’
section for
instructions.
For wiring instructions see ‘Speaker & Burial Cable Connections’ on page 11.
6. Thread the
speaker’s wiring
through the
wiring hole
in the ground
stake.
5. Using a mallet and
a wooden block,
pound the ground
stake into the
ground. Drive the
ground stake down
until the ground
stake flange is
nearly flush with
the surface. Note:
Leave a slight
gap between
the ground stake
flange and the
ground surface
in order to thread
speaker wiring
through the wiring
hole in the ground
stake.