Brochure

Monument 7XW
Frequency Response
52–25,000 Hz ± 3 dB
Tweeter Dispersion (horizontal x vertical)
80° x 30°
Sensitivity
95 dB @ 2.83 volts/ meter
Impedance
4 ohms. Compatible with 4, 6, or 8 ohm rated amps.
Crossover Frequencies
200, 3200 Hz
Tweeter Aiming
Rotatable tweeter for horizontal or vertical installations
High-Frequency Driver
1.25 x 2.4 inch (3.2 x 6.1 cm) Folded Motion XT Obsidian
transducer with 4.5 x 2.75 inch (11.4 x 7 cm) diaphragm.
Mid-Frequency Driver
6.5-inch (16.5 cm) black unidirectional carbon fiber multi-
section cone with Nomex
®
backer and cast aluminum basket,
sealed back chamber format. Concave dust cap.
Low-Frequency Drivers
Two 6.5-inch (16.5 cm) black unidirectional carbon fiber multi-
section cone with Nomex
®
backer and cast aluminum basket,
sealed back chamber format. Concave dust cap.
Passive Radiators
Three 6.5-inch (16.5 cm) unidirectional black carbon fiber
cone with Nomex
®
backer and cast aluminum basket,
sealed back chamber format. Concave dust cap.
Binding Post Inputs
Push style (two sets for easy installation)
Components
Custom air core coil inductors, polypropylene film capacitors, and
low DF electrolytic capacitors. Thermal/current protection.
Suitable Amplifier Range
20–300 watts
Max Power Handling
150 watts
Weight
44.5 lb (20.2 kg)
Overall Size (height x width x depth)
46.86 x 10.6 x 4.11 inch (1190.2 x 269.2 x 104.3 mm)
Required Opening (including tolerance)
45.57 x 9.29 inch (1157 x 236 mm)
Projection From the Wall Surface
0.31 inch (7.8 mm)
Depth Required Behind the Wall Surface
3.8 inch (96.5 mm)
Optional Accessories
Pre-install bracket (PN: 7XWBRK)
Statement 40XW
Frequency Response
48–25,000 Hz ± 3 dB
Tweeter Dispersion (horizontal x vertical)
80° x 52-inch line source
Sensitivity
95 dB @ 2.83 volts/ meter
Impedance
4 ohms. Compatible with 4, 6, or 8 ohm rated amps.
Crossover Frequencies
300, 2700 Hz
High-Frequency Drivers
Sixteen 1.25 x 2.4 inch (3.2 x 6.1 cm) Folded Motion XT Obsidian
transducer with 4.5 x 2.75 inch (11.4 x 7 cm) diaphragm.
Mid-Frequency Drivers
Sixteen 3.5-inch (8.9 cm) black unidirectional carbon fiber
multi-section cone with Nomex
®
backer and cast aluminum
basket, sealed back chamber format. Concave dust cap.
Low-Frequency Drivers
Eight 6.5-inch (16.5 cm) black unidirectional carbon fiber
multi-section cone with Nomex
®
backer and cast aluminum
basket, sealed back chamber format. Concave dust cap.
Binding Post Inputs
Push style (two sets for easy installation)
Components
Custom air core coil inductors, polypropylene film
capacitors, and low DF electrolytic capacitors.
Suitable Amplifier Range
50–800 watts
Max Power Handling
400 watts
Weight
150 lb (68.1 kg)
Required Wall Cavity (width)
Minimum: 14.5 inch (368 mm)
Maximum: 16.5 inch (420 mm)
Required Wall Cavity (height, unobstructed)
Minimum: 89 inch (2260 mm)
Required Wall Cavity (depth)
Minimum: 3.5 inch (89 mm)
Enclosure (width x height x depth, excludes padding)
14.3 x 84.2 x 3.4 inch (361 x 2137 x 86 mm)
Grille (height x width)
11.5 x 59.5 inch (292 x 1511 mm)
Installation Kit (included—choose appropriate size)
1/2-inch drywall (PN: 40XWIWK05)
5/8-inch drywall (PN: 40XWIWK0625)