Brochure

Icon 3XW
Frequency Response
78–25,000 Hz ± 3 dB
Tweeter Dispersion (horizontal x vertical)
80° x 30°
Sensitivity
94 dB @ 2.83 volts/ meter
Impedance
4 ohms. Compatible with 4, 6, or 8 ohm rated amps.
Crossover Frequency
2400 Hz
Tweeter Aiming
Rotatable tweeter for horizontal or vertical installations
High-Frequency Driver
1.25 x 2.4 inch (3.2 x 6.1 cm) Folded Motion XT Obsidian
transducer with 4.5 x 2.75 inch (11.4 x 7 cm) diaphragm.
Low-Frequency Drivers
Two 5.25-inch (13.33 cm) black unidirectional carbon fiber
multi-section cone with Nomex
®
backer and cast aluminum
basket, sealed back chamber format. Concave dust cap.
Binding Post Inputs
Push style
Components
Custom air core coil inductors, polypropylene film capacitors, and
low DF electrolytic capacitors. Thermal/current protection.
Suitable Amplifier Range
20–250 watts
Max Power Handling
125 watts
Weight
15.5 lb (7 kg)
Overall Size (height x width x depth)
15.98 x 9.94 x 4.11 inch (405.95 x 252.6 x 104.3 mm)
Required Opening (including tolerance)
14.66 x 8.64 inch (372 x 219 mm)
Projection From the Wall Surface
0.31 inch (7.8 mm)
Depth Required Behind the Wall Surface
3.8 inch (96.5 mm)
Optional Accessories
Pre-install bracket (PN: 3XWBRK)
Tribute 5XW
Frequency Response
71–25,000 Hz ± 3 dB
Tweeter Dispersion (horizontal x vertical)
80° x 30°
Sensitivity
94 dB @ 2.83 volts/ meter
Impedance
4 ohms. Compatible with 4, 6, or 8 ohm rated amps.
Crossover Frequency
2250 Hz
Tweeter Aiming
Rotatable tweeter for horizontal or vertical installations
High-Frequency Driver
1.25 x 2.4 inch (3.2 x 6.1 cm) Folded Motion XT Obsidian
transducer with 4.5 x 2.75 inch (11.4 x 7 cm) diaphragm.
Low-Frequency Drivers
Two 5.25-inch (13.33 cm) black unidirectional carbon fiber
multi-section cone with Nomex
®
backer and cast aluminum
basket, sealed back chamber format. Concave dust cap.
Passive Radiators
Two 6.5-inch (16.5 cm) black unidirectional carbon fiber multi-
section cone with Nomex
®
backer and cast aluminum basket,
sealed back chamber format. Concave dust cap.
Binding Post Inputs
Push style (two sets for easy installation)
Components
Custom air core coil inductors, polypropylene film capacitors, and
low DF electrolytic capacitors. Thermal/current protection.
Suitable Amplifier Range
20–250 watts
Max Power Handling
125 watts
Weight
25.5 lb (11.6 kg)
Overall Size (height x width x depth)
31.13 x 10.6 x 4.09 inch (790.82 x 269.2 x 103.93 mm)
Required Opening (including tolerance)
29.82 x 9.29 inch (757 x 236 mm)
Projection From the Wall Surface
0.31 inch (7.8 mm)
Depth Required Behind the Wall Surface
3.8 inch (96.5 mm)
Optional Accessories
Pre-install bracket (PN: 5XWBRK)