User Manual

12
*Specifications are subject to change without notice.
sPeCiFiCations*
System Frequency Response ...............
Tweeter Dispersion (horizontal x vertical)......
Sensitivity.............................
Impedance ............................
Crossover Frequency.....................
High-Frequency Driver ...................
Mid-Frequency Driver ....................
Low-Frequency Driver....................
Controls ..............................
Binding Post Inputs ......................
Components...........................
Suitable Amplifier Range .................
Maximum Power Handling ................
Weight...............................
Overall Size (diameter x depth).............
Required Opening (including tolerance) .......
Projection From the Wall Surface............
Depth Required Behind the Wall Surface ......
63–25,000 Hz ± 3 dB
30° x 80°
92 dB @ 2.83 volts/meter
4 ohms. Compatible with 4, 6, or 8 ohm rated amps.
400, 2250 Hz
1.25 x 2.4” (3.2 x 6.1 cm) Folded Motion XT
Obsidian Transducer with 4.5 x 2.75” (11.4 x 7
cm) diaphragm.
Two 3.5” (8.9 cm) black unidirectional carbon
fiber multi-section cone with Nomex
®
backer
and cast aluminum basket, sealed back chamber
format. Concave dust cap.
8” (20.32 cm) black unidirectional carbon fiber
multi-section cone with Nomex
®
backer and cast
aluminum basket, sealed back chamber format.
Concave dust cap.
Tweeter Level (dB): +2, –2, 0
Position: Front R/Rear L, Front L/Rear R, For center
choose either
Push style
Custom air core coil inductors, polypropylene
film capacitors in series, and low DF electrolytic
capacitors. Thermal/current protection.
20–300 watts
150 watts
13.5 lb (6.1 kg)
12.8 x 7.5” (325 x 190 mm)
11.46” (291 mm)
0.26” (7 mm)
7.2” (184 mm)