Manualshelf

Installation Guide 2

ManualsBrandsMartinLogan ManualsAudioStatement 40XW White In-Wall Loudspeaker (Each)
11121314151617181920
16
STEP 9: HANG THE SHEET ROCK
9a Hang the sheet rock on the stud wall. The opening
around the Fiberock® install board can be measured
and cut before application. Alternatively, sheet rock
can be loosely hung over the install board and then an
opening cut with a drywall saw using the perimeter of
the install board as a guide. If using this method, avoid
cutting into the sheet rock clips.
NOTE:The surfaces of the sheet rock and install
board will not be on the same plane. The clips
force the sheet rock to be proud of the install board
surface. This is done intentionally.