Owner`s manual

159
MH0-74E
CAUTION
After driving the vehicle, the transaxle
oil temperature may be high enough
to burn your skin. Wait until the oil
filler plug is cool enough to touch
with your bare hands before
inspecting transaxle oil.
NOTICE
When tightening the plug, apply the
following sealing compound or
equivalent to the plug threads to
prevent oil leakage.
Manual transaxle sealant:
SUZUKI Bond No. “1216E” or “1217G”
Gear Oil Change
Since special procedures, materials and
tools are required, it is recommended that
you trust this job to your authorized
MARUTI SUZUKI dealer.
Clutch Pedal
Cable control clutch (if equipped)
EXAMPLE
54G274
Clutch pedal play “d”:
10 - 15 mm (0.4 - 0.6 in.)
Measure the clutch pedal play by moving
the clutch pedal with your hand and
measuring the distance it moves until you
feel slight resistance. The play in the clutch
pedal should be between the specified
values. If the play is more or less than the
above, or clutch dragging is felt with the
pedal fully depressed, have the clutch
inspected by your MARUTI SUZUKI dealer.
Brakes
Brake Fluid
76MH0A110
Check the brake fluid level by looking at the
reservoir in the engine compartment. Check
that the fluid level is between the “MAX”
and “MIN” lines. If the brake fluid level is
near the “MIN” line, fill it up to the “MAX”
line with Maruti Genuine brake fluid.
INSPECTION AND MAINTENANCE
9-14