Owner`s manual

169
MH0-74E
(1)
light housing, turn the holder counter-
clockwise and pull it out.
EXAMPLE
61MM0B078
(3) Removal
(4) Install
2) To remove the bulb of the front turn
signal light (1) from the bulb holder,
push in the bulb and turn it
counterclockwise. To install a new bulb,
push it in and turn it clockwise.
To remove and install the bulb of the
front position light (2), simply pull out or
push in the bulb.
Front Fog Light (if equipped)
1) Start the engine. Turn the steering wheel
to the opposite side of the replacing fog
light to replace the bulb easily. Then turn
off the engine.
EXAMPLE
76MH0A119
2) Remove the clips (1) by prying it off with
a flat blade screwdriver as shown in the
illustration.
(2)
(1)
(3)
(4)
EXAMPLE
76MH0A120
3) Open the end of the cover inside the
fender.
EXAMPLE
80JM071
4) Disconnect the coupler by pushing the
lock release. Turn the bulb holder coun-
terclockwise and remove it.
INSPECTION AND MAINTENANCE
9-24