Specifications
11
ModPac II, 9/09-15
2.3 Installation Materials
Installation Kits
All ModPac II™ A/C units have built-in side anges that function as side brackets. All models
require and are shipped with a bottom mounting bracket. There is also an air intake hood factory
installed behind the lower front panel.
Standard Kit Components - Models AVP24-60:
1. One 12 Ga. "L"-shaped bottom bracket
Accessories:
The package may include other factory-supplied items (optional) as follows:
Part # Description
50121 Digital thermostat. 1 stage heat, 1 stage cool. Non-programmable. Fan switch: Auto
& On. Manual changeover system switch: Cool-Off-Heat. Low temperature protec-
tion. °F or °C.
50123 Digital thermostat. 1 stage heat, 1 stage cool. 7 day programmable. Fan switch: Auto
& On. Auto-change over. Keypad lockout. Non-volatile program memory.
80674 VPG-20S, 20 x 8" Adjustable, Aluminum Double Deection Supply Grille for
AVP 24
80675 VPG-30S, 28 x 8" Adjustable, Aluminum, Double Deection Supply Grille for
AVP 30-36
80676 VPG -40S, 30 x 10" Adjustable, Aluminum, Double Deection Supply Grille for
AVP 42-48-60
80677 VPG -20R, 20 x 12" Aluminum Return Grille for AVP 24
80678 VPG -30R, 28 x 14" Aluminum Return Grille for AVP 30-36
80679 VPG -40R, 30 x 16" Aluminum Return Grille for AVP 42-48-60
80671* VPG -20RF, 20 x 12" Aluminum Return Filter Grille for AVP 24
80672* VPG -30RF, 28 x 14" Aluminum Return Filter Grille for AVP 30-36
80673* VPG -40RF, 30 x 16" Aluminum Return Filter Grille for AVP 42-48-60
*Use when outside air is not required. Remove and discard lter in unit.
Additional Items Needed:
Additional hardware and miscellaneous supplies (not furnished by Marvair
®
) are needed for instal-
lation. For example, the list below contains approximate quantities of items typically needed for
mounting a unit on a wood frame wall structure. Concrete or berglass structures have different
requirements.
10 3/8" mounting bolts for side brackets. The length needed is typically the wall thickness
plus one inch.
20 3/8" washers
10 3/8" hex nuts
6 3/8" x 2-1/2" lag screws for bottom bracket
• Silicone Sealer to seal around cracks and openings
• 4-conductor low voltage multi-colored wire cable (i.e. thermostat wire)