Specifications

14
ModPac II, 9/09-15
2.7 Bracket Installation
1. The ModPac II™ air conditioners have built-in mounting anges. See Figure 5.
2. Refer to Figure 5. Attach the bottom support bracket to the wall using appropriate 3/8" diameter
hardware.
For example, on wooden structures, use 3/8 x 2-1/2 inch all-thread lag screws. The screws must
penetrate the center of the wall stud. Drill a pilot hole in the stud to prevent it from splitting.
Figure 4. "V" Damper Installation
2.6 "V" Damper Installation
®